Home ImprovementHow to Pressure Wash Your Home’s Siding

AdminApril 7, 20201055 min

Pressurized exterior of your home is a great way to clean it thoroughly or prepare it for paint or paint again. High-speed water spray on your home coatings and trim, with or without mixed detergent, will effectively remove dirt, debris and powder residue from corroded paint. This helps ensure that a fresh coat of paint you want to apply to your exterior surfaces will last.

When not to wash

Pressure washing Jacksonville, also known as pressure washing, is not intended to remove paint from coatings, although it is capable of being sprayed long enough in one place. Training the strong water jet in this way will erode the softwood coatings and remove the mortar from the brick.

High pressure washing can be used as a cleaning method on most siding materials, including vinyl, wood, metal and certain types of masonry. However, they should never be used on hard boards that need to be protected from moisture and pieces that can easily damage water and its effects.

If you suspect your home is covered in paint that dates back to 1987, when lead was still a common ingredient in applied finishes, do not apply pressure washer. And it would also be better not to wash it yourself if your home is two stories high or large enough. Leave work to the safest and most experienced professionals.

How to Pressure Wash Your Home's Siding

Pressure washing equipment

High pressure cleaners can be rented from equipment rental. They vary in size and pressure or specification of spray power ranging from 1200 to 3000 pounds per liter. Square inch (PSI). 1200 to 1500 psi models are soft enough for lining materials as vulnerable as aluminum, wood and certain types of steel. Stronger marks or marks in the range of 2500-3000 psi can be used for unpainted surfaces such as vinyl. Renting these high pressure cleaners from Marietta costs you between $ 50 and $ 75 per day. Day.

High pressure washers with stronger nozzles allow shorter cleaning time. Choose one that has provisions for adding detergent to the spray, but mix it instead of the phosphate-free sodium phosphate (TSP) replacement. A pound of TSP is good for four gallons of water. Rinse under running water.

Safe operation of the high-pressure cleaner

Before performing a pressure wash, scrub any mold that adheres to the surfaces to be cleaned. Operate the equipment with both hands and never on a ladder. You can rent an adjustable extension shaft that rises 6 to 12 feet for your high areas, but be aware that this contrast can be difficult to handle.

Align the nozzle three feet away from the wall first and gradually move closer until you determine that the spray effect is strong enough to remove dirt from the coating without damaging it. Never get closer than a foot from the surface. Do not point the syringe at the windows. Avoid directing it upwards so as not to push the water under a coating.


Leave a Reply

Your email address will not be published. Required fields are marked *